Kinetik Power Cells

Standard Installation Instructions:
When replacing your existing battery, wire the vehicles positive wiring harness to the positive terminal on the power cell, wire the negative wiring harness to the negative terminal on the power cell. For additional power cells near your amplifier installation, run one positive wire from your starting battery or new replacement starting power cell to one of your Kinetik HC Power Cell positive terminal. Run one negative wire from your starting battery (or ground to vehicle chassis if necessary) to the negative terminal on the same Kinetik HC Power Cell. If adding more than one Kinetik HC Power Cell, continue to connect each power cell together in parallel (positive to positive and negative to negative) until all power cells are connected. Wire your equipment as suggested by the manufacturer either directly to the Kinetik HC Power Cell(s) near your equipment or to your distribution blocks, etc... Refer to your users manual for wiring gauge size and length suggestions.

WARNING:
Never short circuit (touch positive to negative in any manner) your Kinetik Power Cell, such action could cause physical harm or death.

Kinetik Power Cells

Kinetik HC600 Power Cell ~ $199
More powerful than 100 1 farad caps! Extreme power in a small package. Mount near your amplifier for tons of power reinforcement. Easily starts a V8 engine!

Specifications
Weight: 14lbs
Ah: 20
Dimensions: 7"x3"x6.5"
Suggested Retail: $199.99
Common Specifications
AGM Technology
Sealed Non-Spillable Design
Mount In Any Position
Ultra Low ESR
More Plates For Stronger Energy Density
Higher Voltage Under Load
Tightly Packed Cells
Superior Heat & Vibration Resistance

.

.
Kinetik HC800 Power Cell ~ $199
More powerful than 200 1 farad caps! Compact power that fits anywhere. Use as a reinforcement for amplifiers or as your starting battery where weight is a concern, such as racing applications.

Specifications
Weight: 26lbs
Ah: 36
Dimensions: 7.6"x5"x6"
Suggested Retail: $199.99
Common Specifications
AGM Technology
Sealed Non-Spillable Design
Mount In Any Position
Ultra Low ESR
More Plates For Stronger Energy Density
Higher Voltage Under Load
Tightly Packed Cells
Superior Heat & Vibration Resistance

.

.
Kinetik HC1400 Power Cell ~ $349
Most powerful cells for Honda or Mitsubishi OE replacement. Thin profile fits many cars. Provides serious current for any demands. Available in reversed terminals to allow for easy installation in many import OEM locations, ask your retailer for KHC1400R.

Specifications
Weight: 39lbs
Ah: 60
Dimensions: 9"x5.3"x8.1"
Suggested Retail: $399.99
Common Specifications
AGM Technology
Sealed Non-Spillable Design
Mount In Any Position
Ultra Low ESR
More Plates For Stronger Energy Density
Higher Voltage Under Load
Tightly Packed Cells
Superior Heat & Vibration Resistance
.
.
Kinetik HC1800 Power Cell ~ $379
Full size powerhouse. Fits vehicles with larger battery boxes. Capable of powering nearly any system without compromise.

Specifications
Weight: 54lbs
Ah: 81
Dimensions: 10"x6.5"x8.2"
Suggested Retail: $419.99
Common Specifications
AGM Technology
Sealed Non-Spillable Design
Mount In Any Position
Ultra Low ESR
More Plates For Stronger Energy Density
Higher Voltage Under Load
Tightly Packed Cells
Superior Heat & Vibration Resistance
.
.

Kinetik HC2400 Power Cell ~ $449
MOST POWERFUL audio cell anywhere, PERIOD! Used in the loudest vehicles in the world and boasting over 180dB when used in competition. This bad boy has more current than power cells twice its size. If you want the BEST, this is it. Providing thousands of amps at near dead short, this power cell performs best when abused.

Specifications
Weight: 69lbs
Ah: 128
Dimensions: 13"x6.7"x8.5"
Suggested Retail: $499.99
Common Specification
AGM Technology
Sealed Non-Spillable Design
Mount In Any Position
Ultra Low ESR
More Plates For Stronger Energy Density
Higher Voltage Under Load
Tightly Packed Cells
Superior Heat & Vibration Resistance